10
OWNER'S MANUAL • T30
MOVING AND STORAGE
After assembly is complete, you may fold the
machine into the upright position for storage. To hold
the machine, raise the desk until it locks in to position.
NOTE! Make sure you hear the click sound of the deck
locking into position. This is to ensure the deck is
locked in place and will not drop back down.
NOTE! Make sure the treadmill’s elevation is at 0
before folding the deck. If the elevation is not at 0,
folding will damage the mechanism.
First to step on the pedal, second push the frame
toward the console then leave the deck lower to the
floor.
NOTE! This machine has a built-in safety unfolding
feature to help the deck lower slowly. Please make
sure there are no children or other things under the
deck when you lower it.
TO MOVE THE TREADMILL
Before moving the T30, be sure the power cord is
unplugged from the wall and the treadmill. Fold
up the running deck until it is locked and push the
equipment on the transportation wheels. Lower the
treadmill carefully onto the floor. Hold the handlebar
to move forward the treadmill.
NOTE! Transport the treadmill with extreme caution
over uneven surfaces, for example over a step. The
treadmill should never be transported upstairs using
the wheels over the steps, instead it must be carried.
We recommend that you use a protective base when
transporting the equipment.
NOTE! The running belt needs to be realigned and
centered after moving.
To prevent malfunctioning of the treadmill, store it
in a dry place with as little temperature variation as
possible, protected against dust. Always unplug the
treadmill from the electrical outlet when not in use.
TECHNICAL DATA
Length (storage position) ...............197 cm (107 cm)
Height (storage position) ................137 cm (178 cm)
Width .............................................94 cm
Weight ...........................................105,2 kg
Running surface ............................51 x 150 cm
Speed .............................................0.8-18.0 km/h
Elevation range .............................0-12 %
Motor..............................................2.5 HP
The T30 treadmill meets the requirements of the EU’s
EMC Directives on electromagnetic compatibility
(89/336/EEC) and electrical equipment designed for
use within certain voltage limits (73/23/EEC). This
product therefore carries the CE label.
The T30 treadmill meets EN precision and safety
standards (EN-957).
Due to our continuous policy of product development,
Tunturi reserves the right to change specifications
without notice.
CAUTION! The instructions must be followed carefully
in the assembly, use and maintenance of your
equipment. The warranty does not cover damage
due to negligence of the assembly, adjustment and
maintenance instructions described herein. Changes
or modifications not expressly approved by Tunturi
Oy Ltd will void the user’s authority to operate the
equipment!
We wish you many enjoyable trainings with your
new Tunturi training partner!
T30_08_LOCKED.indd 10 16.5.2008 12:11:29