Filter
Top Products
6
PKGP-PRC001-EN
Features and
Benefits
Standardized Components
• Components are placed in the same
location on all Voyager units.
Familiarize yourself with one Voyager
and you are familiar with every
Voyager.
• ReliaTel can fit all Voyager Packaged
Gas/Electrics, Cooling with Electric
Heat, and Heat Pump models. This
provides standardization of parts for
the contractors. Less money is tied up
in inventory using the ReliaTel.
• Contractors/owners can stock fewer
parts due to standardized components
throughout Voyager units.
Single Side Service
Single side service is standard on all
Voyager 12½-20 tons.
Quick-Access Panels On The 12½-20 Tons
Remove three or fewer screws for access
to the standardized internal components
and wiring.
Easy Access Low Voltage Terminal Board
Voyager’s Low Voltage Terminal Board is
external to the electrical control cabinet.
It is extremely easy to locate and attach
the thermostat wire. This is another cost
and time saving installation feature.
Low Voltage Connections
The wiring of the low voltage
connections to the unit and the zone
sensors is as simple as 1-1, 2-2, and 3-3.
This simplified system makes it easy for
the installer to wire.
Colored And Numbered Wiring
You save time and money tracing wires
and diagnosing the unit.
VariTrac™
When Trane’s changeover VAV System
for light commercial applications is
coupled with Voyager, it provides the
latest in technological advances for
comfort management systems and can
allow thermostat control in every zone
served by VariTrac.
VariTrac
Quick-Adjust Idler Arm
With the Quick-Adjust Idler Arm, the belt
and sheaves on all 12½-20 tons can be
quickly adjusted without moving the
mounted fan motor. The result is a major
savings in time and money.