Trane PKGP-PRC001-EN Heat Pump User Manual


 
4
PKGP-PRC001-EN
Features and
Benefits
Actual shipping tests were performed
to determine packaging requirements.
Units were test shipped around the
country to determine the best
packaging. Factory shake and drop
tests were used as part of the package
design process to help assure that the
unit arrives at the job site in top
condition.
Rigging tests include lifting a unit into
the air and letting it drop one foot,
assuring that the lifting lugs and rails
hold up under stress.
We perform a 100% coil leak test at the
factory. The evaporator and condenser
coils are leak tested at 200 psig and
pressure tested to 450 psig.
All parts are inspected at the point of
final assembly. Sub-standard parts are
identified and rejected immediately.
Every unit receives a 100% unit run test
before leaving the production line to
make sure it lives up to rigorous Trane
requirements.
We test designs at our factory not on our
customers!
Conversionless Units
The dedicated design units (either
downflow or horizontal) require no
panel removal or alteration time to
convert in the field — a major cost
savings during installation.
Horizontal units come complete with
duct flanges so the contractor doesn’t
have to field fabricate them. These duct
flanges are a time and cost saver.
U-shaped Airflow
U-shaped airflow allows for improved
static capabilities.
Weather Tight Top and Cabinet
Voyager units incorporate either a one
piece top or the Trane-Tite-Top (T
3
).
Each part of the top (either two or three
pieces) overlaps in such a way that
water cannot leak into the unit. These
overlapped edges are gasketed and
sealed to ensure superior water
integrity.
Quick- Access (12½-20 tons) panels
reduce the number of possible water
entry points.
For added water integrity, Voyager has
a raised 1
1
/
8
" lip around the supply and
return of the downflow units to prevent
water from blowing into the ductwork.
Quality And Reliability Testing
The fan and idler arm assembly
designs have been tested to over
300,000 cycles each. Our combined
cycle testing is now over 7,000,000
cycles.
All of Voyager’s designs were
rigorously rain tested at the factory to
ensure water integrity.