Trane PKGP-PRC001-EN Heat Pump User Manual


 
PKGP-PRC001-EN
17
Performance
Data
(15 Ton)
Fan motor heat (MBH) = 3.15 x Fan BHP.
Data includes pressure Drop Due to Wet Coils and Filters.
No accessories or options are included in pressure drop data.
Refer to Table PD-19 to determine add’l static pressure drop
due to other options/accessories.
Notes:Notes:
Notes:Notes:
Notes:
1. Field Supplied Fan Sheave BK105 Required. Field Supplied Belt may be necessary.
2. Field Supplied Motor Sheave IVP50 Required.
Trane's factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed
and tested to operate reliably and continuously at all cataloged conditions, Using the full horsepower range of
our fan motors as shown in our tabulated data will not result in nuisance tripping or premature motor failure.
Our product's warranty will not be affected.
Table PD-7 — Evaporator Fan Performance — 15 Ton — WC*180B — Continued
External Static Pressure (Inches of Water)
1.10 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
3 HP Standard Motor & Drive 3 HP Standard Motor & Field Supplied High Static Drive Accessory (2)
4800 819 2.30 846 2.43 872 2.56 897 2.69 922 2.82 947 2.96 971 3.09 995 3.24 1018 3.38 1041 3.54
5400 853 2.82 877 2.98 900 3.13 924 3.28 947 3.43 970 3.58 993 3.72 1016 3.87 1038 4.02 1060 4.17
6000 893 3.43 915 3.59 936 3.77 957 3.94 978 4.12 999 4.29 1020 4.46 1041 4.62 1062 4.78 1083 4.94
6600 935 4.18 956 4.33 976 4.50 996 4.68 1016 4.87 1035 5.07 1054 5.26 1073 5.45 1092 5.64
7200 980 5.09 999 5.25 1018 5.40 1037 5.57 1056 5.75 ———————
5 HP Oversized Motor & Drive
5 HP Oversized Motor & Field
Supplied High Static Drive (2)
Table PD-7 — Evaporator Fan Performance — 15 Ton — WC*180B
External Static Pressure (Inches of Water)
.10 .20 .30 .40 .50 .60 .70 .80 .90 1.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
3 HP Standard Motor & Field Supplied Low Static Drive (1) 3 HP Standard Motor & Drive
4800 546 1.07 574 1.18 601 1.29 629 1.41 657 1.52 685 1.63 713 1.75 740 1.89 767 2.03 793 2.17
5400 593 1.34 620 1.49 647 1.65 673 1.80 701 1.96 730 2.13 756 2.25 781 2.37 806 2.51 830 2.66
6000 648 1.92 674 2.10 699 2.28 727 2.37 749 2.48 774 2.66 801 2.85 825 3.00 848 3.13 871 3.27
6600 702 2.63 731 2.72 754 2.92 778 3.08 803 3.17 823 3.29 845 3.47 870 3.70 893 3.89 914 4.03
7200 761 3.39 789 3.48 811 3.65 831 3.88 855 4.02 877 4.12 895 4.24 915 4.43 938 4.68 960 4.91
5 HP Oversized Motor & Drive