Filter
Top Products
10
EN
When you set the air conditioner to AUTO mode, it automatically selects cooling, heating, or fan only operation depending on the room
temperature. () see page 19.)
The fan speed and louver are also automatically controlled.
Start
a button
Press this button to start the air conditioner.
b AUTO button (AUTO)
Press AUTO button.
c Temperature button ( )
Set the desired temperature.
• The OPERATION indicator (green) on the display panel of the indoor unit lights. The
operating mode is selected according to the room temperature and operation starts
after approximately 3 minutes.
• If the AUTO mode is uncomfortable, you can select the desired conditions manually.
The fan speed and louver position can be changed, and MODE is also changed from
AUTO to A when the fan speed or louver position is changed.
The fan speed indicator is also shown.
Stop
button
Press this button again to stop the air conditioner.
When you set the air conditioner to A mode or switch over from AUTO operation because of a change in settings, the air conditioner
automatically selects cooling or heating operation depending on the room temperature. () see page 19.)
Start
a button
Press this button to start the air conditioner.
b Mode select button (MODE)
Select A.
c Temperature button ( )
Set the desired temperature.
d Fan speed button (FAN)
Select one of “AUTO” LOW , LOW+ , MED , MED+ ,
HIGH .
• The OPERATION indicator (green) on the display panel of the indoor unit lights. The
operating mode is selected according to the room temperature and operation starts
after approximately 3 minutes.
• The temperature, fan speed and louver position can be changed. You can select the
desired conditions manually.
Stop
button
Press this button again to stop the air conditioner.
AUTOMATIC OPERATION
AUTOMATIC OPERATION (AUTO CHANGEOVER)
a
c
b
TEMP
a
b
c
d
TEMP