Filter
Top Products
76
7. How to copy the program operation time
When setting the program operation, already set program can be copied and set to
the other day of the week.
<Example: To copy the operation contents of Monday to Tuesday>
1. Push
CHECK
button in normal display.
2. Push
DAY
button and put the operation reserve
indication
on the day of the week of which the
program operation is already set.
(Monday in the example)
3. Push
PROGRAM
button.
Present day of the week indication
and Operation
reserve indication
flash.
4. Push
DAY
button and put the present day of the
week indication
on the day of the week to be copied.
(Tuesday in the example) (For continuous copying,
push
SET
button, and then push
DAY
button.)
1
Push
CHECK
button.
<Example: Case to check the program
operation time of Wednesday in Monday>
• The operation reserve indication
flashes in
the normal display status.
CAUTION
1. While reserve indication is
flashing, the display does not
change even if other buttons are
pushed than
DAY
,
CHECK
, and
PROGRAM
button.
2. If 30 seconds have passed while
the reserve indication
is flashing
without pushing
DAY
,
CHECK
or
PROGRAM
button, the display returns
automatically to the original
display. (Normal display)
5. Push
PROGRAM
button. The operation reserve indication goes on under the copied day of
the week.
8. How to check the program operation time
2
Push
DAY
button and put the operation
reserve indication
on the day of the week
to be checked.
• Every pushing
DAY
button, the operation
reserve indication
flashes and the contents
of program operation time of the day of the
week on which the operation reserve
indication
has been put on is displayed.
WEEKLY TIMER
ERROR
SuMoTuWeTh FrSa
PROGRAM1
PROGRAM2
PROGRAM3
CHECK
PROGRAM
SET
DAY
HH MM
CLEAR
CANCEL
WEEKLY TIMER
ERROR
SuMoTuWeTh FrSa
PROGRAM1
PROGRAM2
PROGRAM3
CHECK
PROGRAM
SET
DAY
HH MM
CLEAR
CANCEL
1,
3
2
3
Push
CHECK
button.
• It turns to be normal indication.
ERROR
SuMoTuWeTh FrSa
PROGRAM1
PROGRAM2
PROGRAM3
ERROR
SuMoTuWeTh FrSa
PROGRAM1
PROGRAM2
PROGRAM3
9. How to change the program operation time
10. How to clear the program operation
• Clear of the day of the week
1) Push
PROGRAM
button.
2) Push
DAY
button and select the
reserve mark
to be cancelled.
3) Push
CLEAR
button. The program time
disappears.
4) Push
PROGRAM
button. The operation
reserve indication
disappears.
• Clear of a part of the program
1) Push
PROGRAM
button.
2) Push
DAY
button and select the
reserve mark
on a to be cancelled.
3) Push
SET
button.
4) Push
SET
button again to flash ON
or OFF time of the program to be
cancelled.
5) Push
CLEAR
button.
Then, a part of the program has been
cancelled. At the same time, the
remained programs are automatically
arranged.
6) Push
PROGRAM
button.
11. How to set up the holiday
• The operation reserve day can be
cancelled by setting up the holiday.
1) Push
CANCEL
button. The holiday setup
mark
flashes.
2) Push
DAY
button and select the
holiday setup mark
on the day
which the holiday is set.
3) Push
SET
button. The flashing
holiday setup indication
changes
on. (
)
• Clearance of [HOLIDAY] setup
1) Push
CANCEL
button.
2) Push
DAY
button and select the
holiday setup mark
on the day to
which the holiday is cancelled.
3) Push
SET
button. The holiday setup
mark
disappears and the operation
reserve mark
appears.
• Explanation of operation
The cancel setting day is temporarily
canceled, and from the next day, the
cancel setup mark
disappears and the
operation reserve mark
appears.
CAUTION
• For the day which does not set timer, the
cancellation cannot be set.
WEEKLY TIMER
ERROR
SuMoTuWeTh FrSa
PROGRAM1
PROGRAM2
PROGRAM3
CHECK
PROGRAM
SET
DAY
HH MM
CLEAR
CANCEL
11
9
10
1. Push
PROGRAM
button in the normal display
status.
2. Select the required day reserve mark
by pushing
DAY
button.
3. Push
SET
button.
4. Each push
SET
button, the flashing
part changes in the following figure. Put
the indication on the time to be changed.
5. Using
HH
/
MM
buttons, change the time.
6. Push
SET
button.
7. Push
PROGRAM
button. Then the change
operation has completed.
ERROR
SuMoTuWeTh FrSa
PROGRAM1
PROGRAM2
PROGRAM3