Filter
Top Products
74
HOW TO USE THE TIMER CORRECTLY
1. Operation procedure
2. Turn on the power supply of the air conditioner
• Turn on the power supply of the air conditioner connected with a program weekly
timer. (For cooling and heating, do not turn off the power supply for compressor
heating.)
3. Setup of the present time
• Set the present time
(Example: Case that the present time is 11:45.)
Power ON
Turn on the power of the air conditioner.
1
While push
SET
button push
HH
button
to select “hour” of the present time.
• While push
SET
button each pushing
HH
button, change sequently.
• • • • • •
• While keep
SET
button pushed, continu-
ous pushing
HH
button makes fast forward.
(Example: Leave the finger at display of
11, you can set 11 o’clock.)
• When release
SET
button, the hour is
set, and
mark changes flashing to
light.
2
While push
SET
button push
MM
button to select “minutes” of the present time.
• While push
SET
button, each pushing
MM
button change sequently.
• • •
• While keep
SET
button pushed continuous, pushing
MM
button makes fast forward.
(Example: Leave the finger at display of 45 you can set 45 minutes.)
• When release
SET
button, the minutes are set, and make changes flashing to
light.
CAUTION
• The time cannot be changed only when
HH
button or
MM
button pushed.
• If 30 seconds have passed while the button is flashing without pushing
DAY
or
HH
/
MM
buttons, the display returns automatically to the original display (Normal display).
In this case, repeat the procedure from the 1st step.
Program weekly timer set up
Setup of the present time
¯
Setup of the present day of the week
¯
Setup of the program operation for a week
WEEKLY TIMER
ERROR
SuMoTuWeTh FrSa
PROGRAM1
PROGRAM2
PROGRAM3
CHECK
PROGRAM
SET
DAY
HH MM
CLEAR
CANCEL
1
2
2
1
4. Setup of the day of the week
• Set the today of the week.
(Example: Case of Wednesday)
1
While push
SET
button push
DAY
button to select “today” of the week.
• While pushing
SET
button, each push
DAY
button, the display of the present
day of the week
flashes, and the display
moves in order.
1
First push
PROGRAM
button.
• When pushing
PROGRAM
button, the reserve mark
flashes.
2
Push
DAY
button, select the day for operation and
then push
SET
button.
When pushing
SET
button, the flashed reserve mark
changes, and ON time of the program 1 flashes at the
same time.
CAUTION
• The day of the week cannot be changed only when
DAY
button is pushed.
• If 30 seconds have passed while the button is flashing without pushing
DAY
or
HH
/
MM
buttons, the display returns automatically to the original display (Normal display).
In this case, repeat the procedure from the 1st step.
5. How to set program timer operation
Set the present time and the present day of the week surely, otherwise the program
operation is not correctly performed.
This timer can control up to 3 cycle program per day.
(1 cycle or 2 cycles can be also set up.)
The following items can be set to the program operation.
• Setup of [ON] ® [OFF] time ([ON] or [OFF] only cannot be set up singly.
<Name and functions>
SuMoTu WeTh Fr Sa
WEEKLY TIMER
ERROR
SuMoTuWeTh FrSa
PROGRAM1
PROGRAM2
PROGRAM3
CHECK
PROGRAM
SET
DAY
HH MM
CLEAR
CANCEL
1
WEEKLY TIMER
ERROR
SuMoTuWeTh FrSa
PROGRAM1
PROGRAM2
PROGRAM3
CHECK
PROGRAM
SET
DAY
HH MM
CLEAR
CANCEL
Operation time of program 1
Operation time of program 2
Operation time of program 3
Example:
To set the operation time of Monday as follows:
From 8:00 to 12:00
From 12:40 to 16:50
From 17:00 to 19:00
Operates
2
1
SuMoTuWeTh Fr Sa
PROGRAM1
PROGRAM2
PROGRAM3