Filter
Top Products
- 3 -
Equipment Inspection
• Upon receipt of the equipment, inspect the packaging and equipment for shipping damage.
• Carefully unpack the equipment and check for parts that may have been damaged during
shipping, missing parts, or concealed damage. If any discrepancies are discovered, it should
be noted with the carrier prior to accepting the shipment, if possible. File a claim with the
carrier if necessary and immediately notify your Toshiba Customer Support Center.
• DO NOT install the ASD if it is damaged or if it is missing any component(s).
• Ensure that the rated capacity and the model number specified on the nameplate conform to
the order specifications.
• Modification of this equipment is dangerous and is to be performed by factory trained
personnel ONLY. When modifications are required contact your Toshiba Customer Support
Center.
• Inspections may be required after moving the equipment.
• Contact your Toshiba Customer Support Center to report discrepancies or for assistance if
required.
Handling and Storage
• Use proper lifting techniques when moving the breaker; including properly sizing up the load,
getting assistance, and using a forklift if required.
• Store in a well-ventilated location and preferably in the original packaging if the equipment
will not be used upon receipt.
• Store in a cool, clean, and dry location. Avoid storage locations with extreme temperatures,
rapid temperature changes, high humidity, moisture, dust, corrosive gases, or metal particles.
• The storage temperature range of the breaker is 23° to 104° F (-5° to 40° C).
• DO NOT store the unit in places that are exposed to outside weather conditions (e.g. wind,
rain, snow, etc.).
• Store in an upright position.