Filter
Top Products
- 17 -
(1) When the spring is released -
Perform the steps shown in Figures 13 and 14 in that order.
(2) When the spring is taut -
Perform the step shown in Figure 15.
Figure 13 Turn the handle clockwise 3 to 5
times and make sure that the spring status
is taut.
Figure 14 Press the closed lever (green) in
the direction of the arrow to close the
circuit. When the switching status will
change to ON, the VCB is set in close
state.
Figure 15 Press the closed lever (green) in
the direction of the arrow to close the
circuit. When the switching status will
change to ON, the VCB is set in close state.
CLOSED
LEVER
CLOSED
LEVER
CHARGING
HANDLE