Filter
Top Products
- 4 -
Operating the VCB
Failure to take the opportunity to discover abnormalities can result in injuries and
equipment damage. Always check to make sure that the ON and OFF indicators are
correct before operating the equipment.
To avoid damaging the equipment, do not close the circuit when the unit switching
indicator is ON.
Connecting and disconnecting the main circuit
To avoid injury and damage to the equipment, do not remove the holding pin unless you
are moving the VCB outside the panel.
To prevent electric shock or other injury, follow the instructions given in the instruction
manual when moving the equipment in or out of the panel.
Disposal
Never dispose of electrical components via incineration. Contact your state environmental agency for
details on disposal of electrical components and packaging in your area.