Filter
Top Products
ATTACH SILL TO JAMBS
ATTACH HEAD TO JAMBS
4
5
NOTE: Be sure that foam pads are in place before assembling frame.
Apply sealant to sill and side
jambs as shown.
Fasten side jambs to sill through
pre-drilled holes using (3) #10 x 3
flat head screws. (Starting with
center screw is recommended.)
Repeat of opposite side.
"
#10 x 3” flat head screw
Apply sealant to end of head
jamb.
Fasten side jambs to head jamb
through pre-drilled holes using
(3) #10 x 3 flat head screws.
(Starting with center screw is
recommended.)
Repeat for opposite side.
"
#10 x 3” flat head screw
Sill
Jamb
Sealant
Head Jamb
Side Jamb
Sealant
4
Sealant
Sill
Pads
Sealant
Jamb
Apply sealant here
INACTIVE side ONLY