Filter
Top Products
15
INSTALL FOOT BOLT KEEPER
INSERT PLUGS
ATTACH JAMB COVER
SLIDING SCREEN DOOR
26
27
28
29
Close the active door completely.
Align notch in keeper with foot bolt
as shown.
Only the two exposed holes will be
used for installation. Pre-drill using
a 1/8" drill bit to drill two holes
through the holes in the keeper into
the sill cap and through the fiberglass
of the sill.
Screw (2) #8 x 1" S.S. Pan head
sheet-metal screws into the holes.
Exposed holes
Foot bolt keeper
#8 x 1” pan head
screw
Notch
Insert supplied hole plugs
into roller adjustment holes.
Place jamb cover on inactive
jamb with longer edge pointing
towards inactive panel. Press
into place using a rubber mallet
or a wood block and hammer.
Hole plug
Refer to instructions supplied with screen door.
Interior
Inactive jamb
Inactive panel
Jamb cover
Long edge