Therma-Tru Smooth-Star Door User Manual


 
19
JAMB EXTENSION INFORMATION
The following images are intended to help clarify how a patio door is
installed in different frame openings.
The jamb extensions are made of standard wood trim materials, readily
available from lumber yards and building material retail stores.
Attach the jamb extensions through the side into the wall.
4 9/16"
2 x 4 CONSTRUCTION
1 1/8”
Exterior
2 x 6 CONSTRUCTION
6 9/16"
2”
3/4"
1 1/8"
Exterior
WEATHERPROOF, FINISH AND MAINTAIN
• Add insulation to air space between opening and unit.
• Caulk around entire perimeter of unit on exterior side; seal sealing fins to siding
or facing, seal front bottom edge of sill, seal all joints between jamb and mouldings.
• Seal joints between exterior hardware trim and door face to prevent air and water
infiltration.
• Paint or stain according to Therma-Tru instructions. Do not paint gaskets or
weatherstrip.
• Maintain or replace sealants and finishes as soon as any deterioration is evident.
For semi-gloss or glossy paints or clear coats, do this when surface becomes dull
or rough. More severe exposures require more frequent maintenance.
• All Therma-Tru doors must be finished and maintained in accordance with our
recommendations. Failure to do so may affect the applicable warranty.
• Remove sill tape and labels on glass.
• Use touch-up paint to paint heads of rough opening screws