Therma-Tru Smooth-Star Door User Manual


 
1
The following packages are needed to complete the installation of your
Sliding Patio Door System.
Therma-Tru
®
Check all components for correct size and color.
Tools and materials needed for
assembly and installation:
"
Phillips Head
I
Rubber Mallet
• Gloves
• Safety Glasses
• Partial roll of nsulation
• Shims
• 100% Silicone Sealant and Caulk Gun
• 6' Level
• Measuring Tape
• Electric Drill
• #2 Phillips Drive Bit
• Staple Gun or Brad Nails
• 1/8 Drill Bit
Screwdriver
1-Screen (sold separately)
Frame Kit
1-Head Jamb
2-Side Jambs
1-Sill
1-Active Interlock
1-Inactive Interlock
1-Panel Bumper
12-#10 x 3" Flat Head Screws
12-#8 x 3" Pan Head Screws
1- This Instruction Booklet
2- Anchor Blocks
2- #10 x 1 Pan Head Screws
2- #10 x 2 Pan Head Screws
1-Sill Cap Base
1-Sill Cap Top
1-Drip Cap
1-Head Sealing Fin
2-Corner Pads
1-Foot Bolt
1-Foot Bolt Keeper
1-#8 x 1 S.S. Pan Head Screw
2-#8 x 1" S.S. Pan Head Screws
2-Active Panel Hole Plug
3-#8 x 9/16" Pan Head Screw
1-Jamb Cover
Touch Up Paint
½"
½"
½"
Handle Set Kit
2-Handles
1-Exterior Backplate
1-Interior Backplate
2-Keys
2-Handle Screws
3-Phillips Head Machine Screws
1-Allen Wrench
2-Backplate Gaskets
1-Active Panel
1-Inactive Panel
Additional Parts
Strike Plate
7 - #8 Flat Head Screws
Active
Panel
Inactive
Panel
Note: Due to ongoing product development, Therma-Tru Corp. reserves the right to make changes in
design, materials, and specifications without notice.