Filter
Top Products
PATCHING
These stitches are used to join two pieces of fabric while leaving a space
between their edges.
Set the pattern selector on “H”. Turn the stitch length dial to “S1”.
1. Fold over the edges of the two pieces of fabric for the hem and baste the edges
to a thin piece of paper leaving a small space between them.
2. Stitch along the edge, pulling both threads slightly when beginning to sew.
* Use thicker than normal threads for sewing.
3. After sewing, remove the basting and the paper. To nish, tie knots on the
reverse side at the beginning and the end of the seams.
STITCH LENGTH DIAL
Page 29
STANDARD FOOT