Filter
Top Products
REVERSE SEWING
At the end of the seam (Figure 1):
Press down the reverse sewing lever A. Sew a few reverse stitches.
Release the lever and the machine will sew forwards again.
REMOVING THE WORK (Figure 2):
Turn the handwheel towards you to bring the thread take up lever to its highest
position, raise the presser foot and remove work towards the back and side.
To cut the thread (Figure 3):
Gently pull the work away releasing a generous length of thread.
Place the threads over the cutting slot B and press down to cut the thread.
Lay the threads to the back of the presser foot before continuing.
Page 16