Filter
Top Products
ZIG-ZAG STITCHING
Turn the pattern selector dial so that the stitch display shows “C”-zig-zag.
Turning the pattern selector dial will increase or decrease the zig zag width.
Using the stitch length dial while zig-zag stitching
The density of zig-zag stitches increase as the setting of stitch length dial
approaches “0”.
Neat zig-zag stitches are usually achieved at settings of “2.5” or below.
Closed up zig-zag stitches (close together) are referred to as a satin stitch.
STITCH LENGTH DIAL
Page 18