Filter
Top Products
ATTACHING ZIPPERS AND PIPING
Set the machine as illustrated. (Figure1)
The zipper foot can be inserted right or left, depending on which side of the foot
you are going to sew. (Fig. 2)
To sew past the zipper pull, lower the needle into the fabric, raise the presser foot
and push the zipper pull behind the presser foot. Lower the foot and continue to
sew.
It is also possible to sew in a length of cord, into a bias strip to form a ‘welt’. (Fig.3)
Set the stitch length control between “1” - “4” (according to thickness of fabric).
STITCH LENGTH DIAL ZIPPER FOOT
Page 24