Filter
Top Products
Total Organic Carbon Analyzer Setup and Operation
Teledyne Analytical Instruments 33
2. From this menu, select:[Parameters]
The following screen appears:
This is the Parameters menu from which the analyzer may be
configured to suit the requirements of the operator
Verify the following settings are correct or select the desired
settings: (Consult “As Built Drawings’ in the Appendix and Factory
Settings Chart – Page V”)
• Carrier Flow Rate
• Liquid Range
Note: The “Liquid Range” setting is that value to which the full-
scale output range is to be set (not the value of the Liquid
Span).
4.2.3 Alarm Settings
The next settings to verify or set are the Alarm Settings.
To adjust the alarm settings:
From the [Edit] Menu, select [Alarms].
The following Menu appears: