Filter
Top Products
SECTION 5 OPERATING YOUR PORTABLE AIR CONDITIONER
5.3 OPERATING REMOTE CONTROL (MODEL KY-25Y ONLY)
14
The functionality of the six (6) buttons on the Remote
Control are identical to the functionality of the buttons
on the Control Panel. Icons for certain buttons may differ
slightly. The Remote Control uses the lithium batteries,
Model: CR2025 (Included). Install the batteries before
using the Remote Control.
You can operate the unit either on the Control Panel or
with the Remote Control.
COOLING OPERATION:
1) Plug the Power Cord into the power outlet.
2) Turn on the unit by pressing the ON/OFF Button
on the control panel or the remote control.
3) Press the Mode Button on the remote control or
the control panel until the symbol appears on
the display.
4) Set the room temperature to your desired room
temperature with the temperature ranges from 64°F-
90°F/18°C-32°C. Recommended temperatures are 80°F-
84°F/27°C-29°C.
5) Select the fan speed by pressing the Fan Button on
either the remote control or the control panel .
SOFT-DRY OPERATION:
1) Plug the Power Cord into the power outlet.
2) Turn on the unit by pressing the ON/OFF Button on the control panel or the remote control.
3) Press the Mode Button on the remote control or the control panel until the symbol
appears on the display.
4) Set the room temperature to an appropriate temperature.
5) Keep the windows and the doors closed to aid the effectiveness of the unit in removing the
moisture from the room.
NOTE: The unit will not perform its dehumidifying function when the room temperature is lower
than 64°F/18°C. Soft-Dry Mode is a very gentle cooling operation consisting primarily of
dehumidifying. It will not lower the room temperature very much. The indoor unit Fan
always runs at Low speed.
Figure 14