Filter
Top Products
SECTION 5 OPERATING YOUR PORTABLE AIR CONDITIONER
13
5.1 CONTROL PANEL AND OPERATING FUNCTIONS CONT’D
HOW TO SET:
When the unit is ON, press the Timer button, “ “ will flash in Timer Set Display Window and the
Timer Indicator will be on in the control panel. Pressing the “Up” or the “Down” button will
change the time accordingly; the flashing digits will change accordingly, until your desired delay time appears.
Your desired time delay will flash for ten (10) seconds. After these ten (10) seconds the digits will change to
display your selected time delay. Time displayed will decrease in ten (6) minute increments.
When the unit is OFF, if it hasn’t been set on Time Delay, press the Timer button. The unit enters Timer
Program. Also, the “ “ will flash in Timer Set Display Window and the Timer Indicator will be on in the
control panel. Press the “Up” or the “Down” button to set to your desired time. When you are
setting the time, the other settings like Operation Mode, Fan Mode, or Set Temperature, will also display.
Ten (10) seconds later, these modes will disappear but be remembered by the Main Controller.
HOW TO CANCEL:
When the unit is set with the TIMER-OFF or the TIMER-ON procedures, press the Timer button to check
the Timer set time, then press within ten (10) seconds to cancel the timer setting.
5.2 LCD DISPLAY PANEL
Auto mode
Soft-dry mode
Cooling mode
Fan-only mode
Fahrenheit mode
Centigrade mode
Figure 13