20
TEMPERATURES MENU
Operating Set Point
will be activated again when the water temperature drops below the
Differential Settings
The water heaters covered in this manual will have between 1
additional heating element installed.
Operating Sequence
On a water heater equipped with 3 heating elements, with an
TABLE 6.
TURN ON TEMP
Element 1
Element 2
Element 3
Tank Temperature
sensed by the control system from the immersion Temperature Probe.
Tank Probe Offset
Tank Temperature.
Used to calibrate for slight differences in control system temperature
sensing. This can improve the precision of temperature control in the storage
tank and at points of use. This feature can also be used to compensate for
may cause the heating cycle to terminate prematurely.