19
TABLE 4 - OPERATING STATES
STATE DESCRIPTION
The water heater is not in an active heating cycle. This usually indicates the temperature in the tank has reached the
reset the control system until the condition that caused the fault has been corrected.
TABLE 5 - CONTROL SYSTEM MENUS
MENUS DESCRIPTION
Temperatures
Offset are located in this menu.
water heater functions and components are displayed in this menu.
or reduced demand periods.
relay activation.
located in this menu.
intermittent operational problems or when the customer has reset the control system prior to a service agent’s
arrival.
persistent.
This control system feature allows the user to restore control system user settings to their factory default settings.
web address, technical support phone number and service agent contact information.