18
Status:
FIGURE 5.
Menu:
of control system menus.
Help:
manufacturer’s web address, technical support phone number and
service agent contact information.
Day/Time/Operating Mode: The current time and day are also
until the time clock has been initially set. Day and Time are adjusted
either Normal Mode or Economy Mode, is displayed beneath the
day and time.
Discreet Menu Contact Information:
30 seconds and then release it. This will launch a discreet menu
where personalized contact information can be entered. Installing
and telephone number. This contact information will be displayed
TABLE 3 STATUS ICONS.
ICON DESCRIPTION
water temperature in the storage tank as sensed from the immersion Temperature Probe.
and fall in response to water temperature in the storage tank as sensed from the immersion Temperature Probe.
call for heat present and the control system has initiated heating element operation.
must be cycled off and on to reset the control system. Note; cycling power will not reset the control system if the condition
that caused the fault has not been corrected.