Filter
Top Products
37
Additional Information
Increased load requirements: MD towers are designed so that cells of
either equal or unequal capacity can be added in the future. This allows
you to compensate for the load increases that normally occur with the re-
placement or addition of production equipment—and still retain continuity
with respect to your cooling tower system.
Tower rebuilding: SPX Cooling Technologies routinely rebuilds and up-
grades cooling towers of all materials and manufacture. If your tower ever
reaches the limit of its service life, we recommend that you investigate the
cost of rebuilding before you routinely order a new replacement tower.
Each MD tower includes a document package containing general
orientation drawings, “MD Field Installation Manual” Assembly Instruc-
tions, and tower component manuals. These documents contain important
information relating to safe installation and operation of the cooling
tower. Field installation is always required for fan guards, piping inlets
and piping outlets. Some optional accessories, such as valves, handrails,
ladders and safety cages may also require eld installation. If installation
details are not covered in the “MD Field Installation Manual” a separate
installation drawing or manual for each purchased option is included in
the document package along with bills of material. If you have purchased
an option and can’t nd the appropriate installation drawing, contact your
local Marley sales representative before proceeding.
In addition to these specic documents, SPX publishes numerous technical
reports including more detailed information on a variety of cooling tower
operation and service topics. Your Marley sales representative will be happy
to give you copies of these reports at no charge.
For complete parts and service assistance, contact the Marley sales rep-
resentativeinyourarea.Ifyouneedhelplocatingtheofcenearestyou,
please phone 913 664 7400 or check the internet at spxcooling.com.