Filter
Top Products
37X Speed Dome Camera 10/50
Main Part Description
DIP Switch
Reset Switch (IP Model)
LAN Port (IP Model)
Audio Port (IP Model)
Main Connector
Sensor I/O Port (I/O Model
)
Dome Cover
Mounting Screw Hole
Drop Prevention Spring
z Dome Cover Do not detach the protection vinyl from the dome cover before
finishing all the installation process to protect the dome cover from
scratches or dust.
z DIP Switch Used to set up camera IDs and protocols.
z Drop Prevention
Spring
This part keeps the camera from dropping during installation and
maintenance. After install the Bracket, please, hang the spring to
the drop prevention hook of main body as shown in picture for
further tasks.
z Mounting Screw Hole Used to assemble the main body with a bracket with screws.
z Main Connector Used for the power wire, the video cable and the RS-485
communication cable connection.
z Sensor I/O Port Used for the sensor in/out connection. (The sensor I/O function
possible models only)
z LAN Port Used for the Ethernet connection. (IP addressable models only)
z Audio Port Used for the audio in/out connection. (IP addressable models
only)
z Reset Switch Used to initialize all the network configurations to the factory
default. (IP addressable models only) Press the button for more
than 5 seconds to initialize the network system.
INTRODUCTION 1