Filter
Top Products
76
c. Elongation
By pressing the elongation button (most right
function button), stitch will elongate as below.
c-1. Regular length
c-2. Double length
c-3. Triple length
c-4. 4X length
c-5. 5X length
If mark is not indicated, the pattern cannot
elongate.
d. Setting the stitch width and length
Machine wil pre-set the stitch width and length
suitable for the pattern. You can change them
as follows.
Press the most left function button at the setting
mode. The pre-set stitch width and length are
indictated in highlight.
For narrower width, press function button (d-1).
For wider width, press function button (d-2).
For shorter length, press function button (d-3).
For longer length, press function button (d-4).
Press the most left function button to close it.
Note:
Letter stitches cannot change the stitch width
and length.
e. After you have complete settings,
Press the setting button again.
G.SEWING THE SELECTED PATTERN
1. Attach the satin foot when sewing decorative &
letter stitch.
2. Lower the presser foot and start sewing.
3. Machine will indicate the sewing pattern on the
LCD.
H.TIPS
a. To sew selected patterns from
beginning.
When you stop sewing at the middle of
patterns, you may want to restart selected
patterns.
In such case, press the decorative & letter stitch
button.
b. To recall the selected pattern.
If you change the pattern to utility stitch,
machine will retain the selected patterns.
To recall these patterns, press the decorative &
letter stitch button and press the setting button.
Machine will recall the selected patterns.
2003.9.10, 8:42 PM76