Filter
Top Products
74
C.TO CHECK SELECTED PATTERNS
As the length of the string increases, patterns will
disappear from sight.
You can check patterns by shifting cursor to the left.
D.INSERTING PATTERN
1. Shift the cursor to next pattern you want to insert.
2. Select the pattern.
Machine will insert pattern just before the
highlighted letter or pattern.
E.TO DELETE PATTERN
1. Shift the cursor to the pattern you want to delete.
2. Press the clear button.
Machine will delete the pattern and cursor will
shift to next pattern.
When the cursor is at furthest right side, machine
will delete just before pattern.
F. SETTING OF EACH PATTERN
You can change the single / repeat sewing, mirror/
reverse stitch, elongation and stitch width, length of
each pattern.
First, press the setting button.
LCD will indicate the setting of highlighted pattern.
As you shift the cursor, the setting of each pattern
will be indicated.
a. Single/ repeat sewing
Pressing the function button directly under the
single/repeat mark will change single sewing and
repeat sewing alternately.
a-1. Single sewing:
Machine will stop automatically after sewing
selected patterns.
a-2. Repeat sewing:
Machine will sew selected patterns repeatedly
until you stop the machine.
NOTE:
If you change single/repeat mode during the sewing
of last selected pattern,
* From Single mode to Repeat mode:
Machine will sew one single pattern, (stop
automatically) and change to repeat mode.
* From Repeat mode to Single mode:
Machine will repeat sewing patterns once more
and stop automatically (then change to single
mode).
b. Mirror / Reverse stitch
The marks of Mirror/Reverse stitch are below.
b-1. Regular stitch
b-2. Mirror stitch
b-3. Reverse stitch
b-4. Mirror and Reverse stitch
Pressing the function button directly below these
mark, mark will change alternately or in rotation.
If mark is not indicated, its pattern cannot change
mirror/reverse stitch.
2003.9.10, 8:42 PM74