Silvercrest SEKU 2000 A16 Indoor Fireplace User Manual


 
4
Safety
SEKU 2000 A1
GB
IE
Safety
In this chapter you are being given important safety information regarding the handling of the appliance.
This appliance complies with the statutory safety regulations. Incorrect usage can, however, lead to personal
and property damage.
Do not cover the appliance!
Covering the appliance can cause overheating and thus lead to
the development of a fi re!
Risk of electrocution
DANGER
Risk of electrocution!
A potentially fatal situation can arise from contact with live wires or components!
Pay heed to the following precautions to avoid the risk of electric shock:
Do not use the appliance if the mains power plug or the connecting cable are damaged.
Before continuing to use the appliance, arrange for the connecting cable to be replaced by
authorised qualifi ed persons.
Do not, under any circumstances, open the appliance housing. There is the risk of receiving
an electric shock if the power carrying connections are touched and/or the electrical and
mechanical construction is changed.
Basic Safety Instructions
For safe handling of the appliance observe the following safety information:
Before use check the appliance for visible external damage. Do not put into operation a appliance that is
damaged or has been dropped.
Arrange for damaged cables or connections to be replaced by authorized qualifi ed persons or by the
Customer Service department.
Persons who, due to their physical, intellectual or motor abilities, are incapable of operating the appliance
safely may only use the appliance under supervision or direction from a responsible person.
Only permit children to use the appliance under supervision.
Repairs should only be carried out by authorized specialist companies or by the customer service department.
Incorrect repairs can result in signifi cant dangers for the user. In addition warranty claims become void.
During the warranty period repairs to the appliance may only be carried out by a Customer Service
department authorised by the manufacturer, if they are not, no additional warranty claims can be
considered for subsequent damages.