Filter
Top Products
13
Assembly
SEKU 2000 A1
GB
IE
Step 7
Take the base plate
6
and insert 4 wood plugs
B
into the holes of the plate underside.
Then place the base plate
6
on the fl oor plate
7
so that the four wood plugs fi t into the four holes in
the fl oor plate.
Rear view Front View
Installing the appliance in the fi re surround
To fi nalise, install the appliance in the assembled fi re surround.
Place the appliance carefully on the base plate (from the rear of the fi re surround) and then push it
gently forward as far as it will go into the opening of the fi re surround.
Secure the appliance to the fi re surround at the edges with the fi xing devices
F
and the screws
6 x 25 mm
A
.
Insert the plug into the mains power socket.
WARNING
Improper laying of the power cable can cause damage to people and property!
Pay heed to the following safety information to avoid these risks:
Do not bend or clamp the power cable and do not lay it tautly.
►
Do not run the power cable over sharp edges. ►
6
7
B
B
A
F