Filter
Top Products
15
SEKU 2000 A1
GB
IE
Switch the appliance off .
Pull the plug from the mains power socket.
Loosen the four screws on the rear panel and remove the metal ventilation panel
9
.
Carefully replace the defective bulb
10
in the light shaft.
Screw the metal ventilation panel
9
back onto the appliance rear.
Cleaning
WARNING
Observe the following safety information to avoid risks and property damage:
Clean the appliance ONLY when it is switched off and cold.
►
IMPORTANT
Possible damage to the appliance.
P
enetrating moisture can cause damage to the appliance.
In order to avoid irreparable damage, when you are cleaning the appliance ensure that moisture
►
cannot get inside it.
Clean the housing exclusively with a soft damp cloth and a mild dishwashing liquid.
■
Troubleshooting
In this chapter you will receive important information for the localisation of malfunctions and remedies for them.
Observe these instructions in order to avoid risks and damage.
WARNING
Observe the following safety information to avoid risks and property damage:
Repairs to electrical appliances may only be carried out by specialists who have been trained by the ►
manufacturer. Considerable risk for the user and damage to the appliance can occur as a result of
incorrect repairs.
9
10
11
Maintenance/Cleaning/Troubleshooting