Filter
Top Products
10
Assembly
SEKU 2000 A1
GB
IE
Assembly
Step 1
Screw three single locking pins
D
with a screwdriver into the prepared holes on the left front panel
2
.
Place two wood plugs
B
into the holes of the front panel
2
.
Insert three adapter sleeves
E
into the three large holes of the left side panel . Thereby, with the
screwdriver line up the adaptor sleeves
E
so that the arrow on the adaptor sleeves points to the outer
edge of the side panel .
Then, bring the front panel
2
and side panel together at right angles, so that the locking pins
D
enter the holes on the left edge of the side panel .
When done, screw all three adapter sleeves
E
to the right with the screwdriver until the locking pins are
clamped into the adapter sleeves and the panels are seated fi rmly together and at right angles.
Step 2
Screw three single locking pins
D
with a screwdriver into the prepared holes on the right front panel
4
.
Place two wood plugs
B
into the holes of the front panel
4
.
Insert three adapter sleeves
E
into the three large holes of the right side panel
8
. Thereby, with the
screwdriver line up the adaptor sleeves
E
so that the arrow on the adaptor sleeves points to the outer
edge of the side panel
8
.
2
D
D
E
D
B
8
4
D
D
D
E
B