Sharp UP-600 Air Conditioner User Manual


 
40
(4) Specifying whether to enable or disable the function for data
transmission to the remote printer master and satellite
If a remote printer is disconnected from the IRC system or any other problem occurs, you
can disable your machine to stop data transmission to the remote printer. This prevents the
error message from appearing on the machine display each time an entry to be transmitted
to that printer is made.
Move the cursor to the “DATA PRINT” line and select “ON
KP”, “ON CHIT”, or “NOTHING” with the [ • ] key (toggle
key) or display the choices by pressing the [SBTL] key.
(5) Specifying the format of remote printing master and satellite
With the following procedure, you can specify what items are to be printed on the remote
printer.
1.
Move the cursor to the following printing format
options and select PRINT or SKIP with the [ • ] key
(toggle key) or display them by pressing the [SBTL]
key.
Printing when quantity is one: PRINT/SKIP
PLU/department code: PRINT/SKIP
Unit price PRINT/SKIP
Amount: PRINT/SKIP
The default setting for these items is SKIP.
2.
Press the [CA/AT] key to finish the programming for
the remote printer. The CHIT FORMAT window will
open.
(For programming the CHIT FORMAT, see the next
paragraph.)