Filter
Top Products
19
3. Consolidated reports — master/back-up master
(1) Report generation procedure
To generate respective reports, use the following procedure, referring to the list of
consolidated reports on the following pages.
1.
Turn the mode switch to the required position (OPXZ,
X1/Z1 or X2/Z2).
2.
Select “SYSTEM X” or “SYSTEM Z” depending on
your need, and press the [ENTER] key.
3.
Select the type of report you wish to generate and
press the [ENTER] key or enter the corresponding
report type No. (2-digit) shown on the display. (If the
desired type of report is not listed on the display, scroll
up or down the screen.)
4.
If you need to enter data to generate the report, follow
the instructions given on the display for entry.
5.
If you wish to generate a report on all the machines in
the system, select “ALL” and press the [ENTER] key.
If you wish to generate a report on specific machines,
select “MACHINE SELECT” and press the [ENTER]
key. In this case, the MACHINE SELECT window will
open. Move the cursor to the machine number, select
“YES,” and press the [ENTER] key.