Filter
Top Products
45
(2) Optional programming for the remote printer – master and satellite
With the following procedure, you can specify what items to be printed on the remote printer.
1. Enter the PGM2 mode from the mode selection window.
2. Select “2 SETTING” from the displayed menu.
The SETTING window will appear.
3. Select “10 OPTIONAL” from the displayed menu.
The OPTIONAL window will appear.
4. Select “5 PRINT SELECT2” from the displayed menu.
The PRINT SELECT2 window will appear.
5. Make appropriate settings for items to be printed on the remote printer and touch the [EXIT] key.
(See below for programming of individual items.)
The DATA NOT SAVED SAVE IT? dialogue will appear.
6. Select “1.SAVE.”
Items to be programmed
SEPARATOR LINE
NO: Does not print the separator line on the remote printer.
YES: Prints the separator line on the remote printer.
FREE TEXT ON KP
NO: Does not print the free text on the remote printer.
YES: Prints the free text on the remote printer.
ITEM CODE ON KP
NO: Does not print the PLU/department code on the remote printer.
YES: Prints the PLU/department code on the remote printer.
PRICE ON KP
NO: Does not print the price on the remote printer.
YES: Prints the price on the remote printer.
AMOUNT ON KP
NO: Does not print the amount on the remote printer.
YES: Prints the amount on the remote printer.
GUEST# ON KP
NO: Does not print the number of guests on the remote printer.
YES: Prints the number of guests on the remote printer.
QTY=1 ON KP
NO: Does not print quantity data on the remote printer when the quantity is “1.”
YES: Prints quantity data on the remote printer even though the quantity is “1.”
UNIT PRICE PRINT
NO: Does not print the unit price on the bill printer.
YES: Prints the unit price on the bill printer.
For settings of the rest of the programming items for PRINT SELECT2, see the UP-3500
Instruction Manual.
NOTE