Filter
Top Products
4 TOLL FREE: 1-800-798-7398
Getting Started with Your Steam Mop - cont’d
IMPORTANT: Do not use on unsealed
wood or unglazed ceramic floors.
On surfaces that have been treated
with wax or some no wax floors,
the sheen may be removed by
the heat and steam action. It is
always recommended to test an
isolated area of the surface to be
cleaned before proceeding. We
recommend that you check the use
and care instructions from the floor
manufacturer.
NOTE: To prolong the life of your
Steam Mop, we recommend using
distilled water.
2 Select either the All-Purpose Mop
Head or Versa-Tile™ Mop Head and
accompanying pad. Use the lavender
loop on the side of the micro-fiber
cleaning pad to slide the mop head
into the pad pocket. Then secure
the quick fasteners on the top of the
pocket to lock in place. (fig. 3)
3 Snap the mop head into the base to
secure it. (fig. 4)
4 Turn the water tank cap counter
clockwise and remove from the tank.
(fig. 5)
Use the filling flask and pour water
into the tank. Do not overfill. Replace
the cap on the water tank. (fig. 6)
fig. 3
fig. 4
fig. 5
fig. 6
S3901D_11_IB_E_110704_2.indd 4 11-07-04 11:07 AM