Shark S3901D Carpet Cleaner User Manual


 
TOLL FREE: 1-800-798-7398
9www.sharkclean.com
Your Shark
®
Lift-Away
Pro
Steam Pocket
®
Mop is designed to clean
surfaces that will withstand high heat
and moisture. Do not use on unsealed
wood surfaces (especially wooden
antique furniture), unglazed ceramic
tile, painted surfaces or surfaces that
have been treated with wax, oils,
varnishes, or shellac. The sheen may be
removed by the heat, steam, and friction
of the cleaning tools. Lacquer and
polyurethane coatings provide a hard
durable protective finish that withstands
moisture, but it is always recommended
to test an isolated area of the surface to
be cleaned before proceeding.
We also recommend you check the use
and care instructions from the surface
manufacturer.
When cleaning finished wood surfaces,
use broad, continuous cleaning strokes.
To prevent surface damage, avoid
focusing steam or allowing the cleaning
tools to sit in one spot for any amount
of time.
NOTE: While the Shark
®
Lift-Away
Pro Steam Pocket
®
Mop will operate
in one of three steam settings in the
mop mode, your Handheld Steamer
is programmed to function on just
one steam setting. This setting
is optimized for above-the-floor
cleaning and garment steaming.
Getting Started With Your
Removable Handheld Steamer
IMPORTANT: Before removing the
Handheld Steamer from the Steam
Mop Housing, make sure that the
unit is not actively steaming. The
ON/STANDBY button should be
flashing blue. If the ON/STANDBY
button is solid blue, then press the
button until it returns to flashing
blue.
1 To remove the Handheld Steamer,
press and hold down the Handheld
Release Buttons while pulling out the
Handheld Steamer. (fig. 15)
fig. 15
S3901D_11_IB_E_110704_2.indd 9 11-07-04 11:07 AM