Shark S3901D Carpet Cleaner User Manual


 
10 TOLL FREE: 1-800-798-7398
Cleaning Tip: The Direct Steam Nozzle creates direct steam spray to clean
and sanitize hard to reach nooks & crannies and other places where germs
may build up. Use the Direct Steam Nozzle to loosen and dislodge compact
dirt often found in corner and tight places where traditional methods and
cleaning tools tend to push dirt into, making it tough to reach and clean.
Spray direct steam and wipe clean with a wet cloth or paper towel.
Using Your Removable Handheld Steamer
with Direct Steam Nozzle
CAUTION: Do not press the steam
trigger until the Direct Steam Nozzle
is snapped into the main nozzle of
your Handheld Steamer.
4 To remove the Direct Steam Nozzle,
press and hold down the Handheld
Release Buttons. Then slide out the
Direct Steam Nozzle using the grip.
CAUTION: Do not press the steam
trigger while removing the Direct
Steam Nozzle. Avoid touching the tip
of the Direct Steam Nozzle, as this
will be very hot after steaming.
NOTE: The Handheld Steamer may
continue to emit steam for a few
seconds after the trigger is released
This is normal, and the steaming will
eventually come to a stop.
FOR SPOT CLEANING AND
STEAMING
2 First attach the Direct Steam Nozzle
by pressing the nozzle onto the
Handheld Steamer until it clicks into
place. (fig. 16)
3 Then press and hold the steam
trigger button to start steaming.
While the steam trigger button is
pressed and held down, the ON/
STANDBY button will be solid blue.
When released, the ON/STANDBY
button will return to flashing blue.
(fig. 17).
For effective cleaning, hold the
steam output nozzle 1-2 inches away
from the surface you’re cleaning.
fig. 16
fig. 17
S3901D_11_IB_E_110704_2.indd 10 11-07-04 11:07 AM