Filter
Top Products
TOLL FREE: 1-800-798-7398
www.sharkclean.com
11. DO NOT unplug by pulling on power
cord. To unplug, grasp the plug not
the power cord. Do not use extension
cords or outlets with inadequate
current carrying capacity.
12. DO NOT put any objects into openings.
Do not use with any opening that is
blocked.
13. DO NOT put hands or feet under the
steam mop. Unit gets very hot.
14. In mop mode use ONLY on flat,
horizontal surfaces. Do not use on
walls, counters or windows.
15. DO NOT use on leather, wax polished
furniture or floors, synthetic fabrics,
velvet or other delicate, steam sensitive
materials.
16. DO NOT add cleaning solutions,
scented perfumes, oils or any other
chemicals to the water used in this
appliance as this may damage the unit
or make it unsafe for use. If you live in a
hard water area, we recommend using
distilled water in your steam mop.
17. When in use, NEVER turn the appliance
over or on its side. NEVER DIRECT
STEAM TOWARDS PEOPLE, ANIMALS
OR PLANTS.
18. NEVER LEAVE THE STEAM MOP IN
ONE SPOT ON ANY SURFACE FOR
ANY PERIOD OF TIME WHEN MICRO-
FIBER PAD IS ATTACHED AS THIS
WILL DAMAGE YOUR FLOORS.
19. Carefully remove the micro-fiber
cleaning pad immediately after you
have unplugged and allowed the steam
mop to cool.
20. When cleaning the steam mop, unplug
the power cord from the electrical
outlet and clean with a dry or damp
cloth. Do not pour water or use alcohol,
benzene or paint thinner on the unit.
21. Extreme caution should be
exercised when using this
appliance to clean stairs.
22. Never use steam mop without
micro-fiber cleaning pad attached.
23. Keep your work area well lit.
24. Store steam mop indoors in a cool,
dry place.
25. To avoid circuit overload, do not
operate another appliance on the
same socket (circuit) as the steam
cleaner.
26. If an extension cord is absolutely
necessary, an extension cord rated
a minimum of 15 ampere, 14 gage
cord should be used. Cords rated
for less amperage may overheat.
Care should be taken to arrange
cord so that it cannot be pulled or
tripped over.
27 Always unplug and allow the steam
mop to cool before removing or
changing mop heads.
WARNING: Your steam mop
is designed to clean hard floor
surfaces that will withstand high
heat. Do not use on unsealed wood
or unglazed ceramic floors. On
surfaces that have been treated
with wax or some no wax floors,
the sheen may be removed by the
heat and steam action. It is always
recommended to test an isolated
area of the surface to be cleaned
before proceeding. We also
recommend that you check the use
and care instructions from the floor
manufacturer.
SAVE THESE INSTRUCTIONS
S3901D_11_IB_E_110704_2.indd 3 11-07-04 11:07 AM