Shark S3901D Carpet Cleaner User Manual


 
TOLL FREE: 1-800-798-7398
13www.sharkclean.com
4 To remove the Flat Scrubber Tool,
press and hold down the Accessory
Hose release button. Then slide out
the Flat Scrubber Tool. (fig. 25)
CAUTION: Do not press the steam
trigger while attaching or removing
the Flat Scrubber Tool.
CAUTION: Do not use the Flat
Scrubber Tool without the
All-Purpose Scrubber Pad attached.
Using Your Removable Handheld Steamer
with Flat Scrubber Tool
Cleaning Tip: The Flat Scrubber Tool is designed for cleaning a variety of surfaces
and is exceptional on those that are large and flat including counter tops, table tops,
walls mirrors, windows, stairs, shelves and other similar surfaces. Super absorbent
micro-fiber bonnet loosens, lifts, and locks in dirt and grime while sanitizing at the
same time.
fig. 23
fig. 24
fig. 25
1 To attach the All-Purpose Scrubber
Pad, place the pad exterior side
down on a flat surface (lavender tab
indicates the bottom of the pad) and
insert the top of the Flat Scrubber
Tool into the top portion of the pad
and then pull the pad over each side
of the back edge.
2 Press the Flat Scrubber Tool onto
the Accessory Hose until it clicks into
place. (fig. 23)
3 Press and hold the steam trigger
to create steam. While the steam
trigger button is pressed and held
down, the ON/STANDBY button will
be solid blue. When released, the
ON/STANDBY button will return to
flashing blue. (fig. 24)
S3901D_11_IB_E_110704_2.indd 13 11-07-04 11:07 AM