Filter
Top Products
SECTION 2. PREPARE THE MACHINE FOR SEWING
Set Up the Machine
Plug in the Machine and Switch on the Power
f
Power supply plug
Power switch
\
COnnector
supply
Machine p}ug
........ J
NOTE: 8etore inserting the plug into your
machine, be sure the power switch is OFF,
t. Check your outlet to be sure it isa 110 to 120 Volt
AC outlet.
2. Insert the machine plug into the three-prong plug
connector, as shown, it will only fit one way.
3. Insert the power supply plug into the outlet.
Power swilch
%
4. Push the power switch to turn on the
power and sewing light.
SAFETY FEATURE:
Your machine will not operate unless the
power switch is turned on. II you are
interrupted or stop sewing, turn off the
power switch to prevent injury to children.
= Foot Control Use
f
/
Fool control
% /
The foot control regulates the speed at which
you sew.
To increase speed, gently press down with
the bail ot your toot.
To decrease speed, release your toot pres-
sure slightly.
NOTE: The toot control is sensitive and will
increase or decrease your sewing
speed immediately.
Practice on a scrap of fabric to regu
late your sewing speed to your
taste and needs.