Sanyo UV Carbon Monoxide Alarm User Manual


 
155
SPECIFICATIONS
Name CO
2
Incubator
Models MCO-19AIC MCO-19AIC(UV)
External dimensions 620 x 710 x 900 mm (W x D x H)
Internal dimensions 490 x 523x 665 mm (W x D x H)
Interior volume 170 L
Exterior Painted steel
Interior Stainless steel containing copper
Outer door Painted steel
Inner door Tempered glass
Trays 4 trays made of stainless steel containing copper
450 x 450 x 12 mm (W x D x H), Maximum load: 7 kg/tray
Access port Inner diameter: 30 mm, On the back side
Insulation Rigid polyurethane foamed-in place
Heating system DHA system (heater jacket + air jacket system)
Heater 314 W
Humidifying system Natural evaporation with humidifying pan
Temperature controller PID control system
Temperature display Digital display
CO
2
controller PID control system
CO
2
density display Digital display
Air circulation Fan assisted
Air filter 0.3 Pm, Efficiency: 99.97% or higher
UV lamp
----- 4W X 1 (ozone-free emission)
Water level sensor
Optical
Alarms
Automatic set temperature alarm, Automatic set CO2 density alarm,
Upper limit temperature alarm, Door alarm,
Low humidifying water alarm,
UV lamp failure alarm (for UV equipped model only)
Remote alarm contacts Allowable contact capacity: 30 VDC, 2 A
CO
2
inlet connection 4 to 6 mm diameter tube
CO
2
inlet pressure 0.03 MPaG (0.3 kgf/cm
2
G, 4.3 psiG)
Accessories 4 trays, 4 sets of tray supports, 1 gas tube, 1 humidifying pan,
stacking plates A and B, 4 protective stickers, 2 tube bands
Weight 93 kg
UV Lamp Add-on Kit (MCO-19UVS) Standard equipment
Optional accessories
H
2
O
2
Generator (MCO-HP), H
2
O
2
Decontamination Kit (MCO-HL),
H
2
O
2
Decontamination Reagent (MCO-H2O2),
Automatic CO
2
Standard Gas Calibration Kit (MCO-SG),
Gas Pressure Regulator (MCO-100L),
Extra Trays (MCO-47ST, includes 2 tray supports),
Half Trays (MCO-25ST), Automatic CO
2
Cylinder Changeover System (MCO-21GC),
Roller Base (MCO-18RB), Communications Terminal (MTR-480/MTR-L03)
Note: Designs and specifications are subject to change without notice.
The ballast is not user replaceable. Please contact qualified service personnel.
64