Sanyo UV Carbon Monoxide Alarm User Manual


 
109
18
LCD PANEL
The following display (called the Top Display) will appear when the power switch is turned ON. The
default temperature is 37.0
o
C and the default CO
2
density is 0%. The date and time are preset at the
factory. Refer to page 30 to change the date and time.㩷㩷
1. Display of set value of temperature
The set value of chamber temperature is displayed.
2. Display of current temperature
The current chamber temperature is displayed.
3. Display of set value of CO
2
density
The set value of the chamber CO
2
density is displayed.
4. Display of current CO
2
density
The current chamber CO
2
density is displayed.
5. Display of current CO
2
cylinder
A and B will be displayed if the optional Automatic CO
2
Cylinder Changeover System (MCO-21GC) is
installed. The port of the CO
2
gas pipe that is currently supplying CO
2
will be displayed in reverse video.
Nothing will be displayed if the MCO-21GC is not installed.
6. Status display field
Various status or alarms are displayed.
When UV lamp is lit: “UV” is displayed in reverse video.
When humidifying water is low: “RH PAN” is displayed in reverse video.
When the door is open: Door: Open” is displayed in reverse video.
7. Message display field
A message is displayed when fault occurs. The message is displayed alternately in normal characters
and reverse video. Refer to pages 46 and 47 for alarm details. OK is displayed during normal
operation.
0
1
0
2
1
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
2
0
2
1
2
2
2
3
2
4
2
5
2
6
2
7
2
8
2
9
3
0
3
1
3
2
3
3
3
4
3
5
3
6
3
7
3
8
3
9
4
0
1
T e m p 3 7 . 0
o
C C O 2 5 . 0 %
A B
2
3
4
5
S t at u s U V R H
P
A N
D o o r : O p e n
6
O K
7
㧟㧣㧜
㧡㧜
5
1
2
6
3
4
7