Sanyo UV Carbon Monoxide Alarm User Manual


 
112
21
㩷㩷Setting the key lock
1. To set the key lock, change the value of the key lock parameter from 0 to 1 on the Stand-by Setting
Display and press the ENTER Key. The buzzer will sound briefly and the keys will be locked.
2. “Key Lock” will be displayed at the right side of “Stand-by Setting”, and changing the temperature and
CO
2
density settings will be disabled.
㩷㩷Removing the key lock
1. To remove the key lock, change the value of the key lock parameter from 1 to 0 on the Stand-by
Setting Display and press the ENTER Key.
2. The cursor will move to the Password Field. Input the 4-digit password (default: 0000) and press the
ENTER Key. When key lock is release, the buzzer will sound briefly, and “Key Lock” will disappear from
the Stand-by Setting Display.
1
S t a n d - b y S e t t i n g
K e y L o c k
2
T e m p e r a t u r e 3 7 . 0
o
C (0-50.0
o
C)
3
C O 2 D e n s i t y 5 . 0 %
(0.0% - 20. 0 % )
4
K e y L o c k 0
Password
H i g h L i m i t 5 2 . 0
o
C
1
S t a n d - b y S e t t ing
2
T e m p e r a t u r e 3 7 . 0
o
C ( 0. 0
o
C- 50. 0
o
C )
3
C O 2 D e n s i t y 5 . 0 %
(0.0% - 20. 0 % )
4
5
K e y L o c k
1
( 0 . U n l o c k 1 . L o c k )
6
H i g h L i m i t 5 2 . 0
o
C
M E N U
O K
C a n c e l
1
S t a n d - b y S e t t i n g
K e y L o c k
2
T e m p e r a t u r e 3 7 . 0
o
C ( 0. 0
o
C- 50. 0
o
C )
3
C O 2 D e n s i t y 5 . 0 %
(0.0% - 20. 0 % )
4
5
K e y L o ck
0
( 0 . U n l o c k 1 . L o c k )
6
H i g h L i m i t 5 2 . 0
o
C