Samsung UCC2800C Air Conditioner User Manual


 
Receiver & Display Unit Installation (Optional)
E-
60
Accessories
Wireless Remote
Controller(1)
Battery(2) FH M4 X 16 Tapped
Screw(2)
Remote Controller
Holder(1)
Receiver & Display
Unit(1)
Disassemble four screws on the place where you would like to install the
receiver & display unit, inside the front panel.
1
Remove the part of the front panel.
2
Secure the receiver & display unit with the screws,
then install the insulation.
3
CC
CC
AA
AA
UU
UU
TT
TT
II
II
OO
OO
NN
NN
Optional kits must be installed by an air conditioner
specialist.
Before installing the optional kits, ensure that you have
turned off the main power.
In case of using the wireless remote controller, you must install the
receiver & display unit to the front panel before fixing the panel.
Receiver
& Display
Unit
Connect the end of the connector wire to the receiver & display unit and
connect the other end of the wire to the electrical component box as
shown in figure.
4