Filter
Top Products
Centralized Controller Installation (Optional)
Accessories
Transmitter(1) Spacer Support(4) Cable-Tie(2)
Centralized Controller(1) Cable-Tie(2) Cable Clamp(5) TH M4 X 16 Tapped
Screw(7)
Open the centralized controller cover by using two grooves on the top of it.
1
Secure the rear cover of the centralized controller on the wall with two
screws.
2
Secure the transmitter with four spacer supports into the electrical
component box.
3
Connect the cable from the PCB to the transmitter.
And connect another cable from the O1, O2 terminals to the transmitter as
shown in figure.
4
Transmitter
Sub PCB
Main PCB
Electrical component box
E-
58