Filter
Top Products
Name and Function of Each Section
COLOR DOME CAMERA User’s Manual
13
COLOR DOME CAMERA User’s Manual
12
Pan Base
control panning angle of camera
Tilt Base Holding Serews
fix tilted position.
Pan Base Holding Screws (Color : Silver)
fix panned position
Zoom Handle
adjust zoom between WIDE and TELE
Focus Handle
after adjusting zoom, adjust focus
SET Button
confirm the status of the selected feature
RIGHT Button
move cursor to the right, change the status of the selected feature
DOWN Button
move cursor to the down, select the desired feature item
UP Button
move cursor to the up, select the desired feature item
LEFT Button
move cursor to the left, change the status of the selected feature
Video Output Terminal
Video Output Terminal to Monitor
Video Output Jack
Power Input Jack
Shield Case
Dome Cover
Connection
Connecting to Monitor
Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor.
• As the connecting method varies with the instruments, refer to the manual
supplied with the instrument.
• If necessary, you can connect the monitor to the REMOTE jack on the back of
your camera.
• Only connect the cable when the power is turned off.
• Set the 75Ω / Hi-Z selection switch as shown below if you have an intermediate
device.
CCTV Camera Monitor
CCTV Camera
Intermediate End monitor