Filter
Top Products
Operating Your Camera
COLOR DOME CAMERA User’s Manual
19
COLOR DOME CAMERA User’s Manual
18
3. Press SET button.
4. You can enter up to 16 characters.
Move the cursor to character-enter location by using the LEFT or RIGHT button.
Select the desired character by using UP or DOWN button.
•The factory defualt characters are A, B, ···, a, b, ···, ., -, ··· 0, 1···, 8, 9
Press the SET button to confirm the blinking character. The first character is
saved and the cursor in the bottom of the screen moves to the next position.
Repeats steps , and until you create the full name you want.
• If you make a mistake while entering name
Move the cursor to ‘CLR’, press ‘SET’ button.
After erasing the character from right to left, correct the character again.
Notes
CANERA ID
POS CLR RESET END
CAMERA ID
POS CLR RESET END
5. Select the position at which the CAMERA ID will be located on the screen.
Move the cursor to 'POS' and press SET button.
The CAMERA ID is displayed on the bottom-left of the monitor screen.
(Default position)
Select the position by using the 4-directional buttons, then press the SET
button to confirm the position.
6. When completed, move the cursor to 'END' and press SET button.
FRONT DOOR
FRONT DOOR
CAMERA ID
POS CLR RESET END