Samsung SVD-4120A/AW Home Security System User Manual


 
Operating Your Camera
COLOR DOME CAMERA User’s Manual
23
COLOR DOME CAMERA User’s Manual
22
S-ATW(Special Auto Tracking White balance): When color temperature is
1800~6000K, specially in sodium lamp, select this mode. (EX. sodium lamp,
inside the tunnel)
AWC(Auto White balance Control): The white balance is automatically
adjusted in a specific environment. In order to obtain the best result, press the SET
button while the camera focuses on white paper. If the environment including the
light source is changed, you have to adjust the white balance again.
MANUAL : To fine adjust, select the Manual mode. You can increase or
decrease the red or blue factor while monitoring the difference on the screen.
Set to 'MANUAL' mode and press the SET button. Increase or decrease the
value for RED(R-Gain) and BLUE(B-Gain), watching the color of the picture, and
press the SET button when you obtain the best color.
• Proper White Balance may not be obtained under the following conditions, in these
cases select the AWC mode.
When the scene contains mostly high color temperature object, such as a blue
sky or sunset.
When the scene is dim.
If your camera faces fluorescent lamp directly or is installed in the place of the
changing illumination.
Notes
MOTION DETECTION
Whenever your camera detects motion of object displaying ‘MOTION DETECTED’
with the number counted up on the screen.
1. Press the SET button to display the SETUP menu and move the arrow
indicator to 'MOTION DET.' using the UP or DOWN button.
MD1: Your camera detects the object’s motion by outline or difference of a
color tone, so this mode is very useful for the daytime or observing
small moving object.
Press SET button.
Move the arrow indicator to ‘AREA SET’ using UP and DOWN button, and
then press the SET button.
Set the areas you want to observe.
· You can adjust the top, bottom, left and right base lines by 13 steps from top to
bottom, 18 steps from left to right with an increment of 1.
2. Set ‘MOTION DET.’ to the desired mode using LEFT or RIGHT button.
SETUP
CAMERA ID OFF
BACKLIGHT WDR
WHITE BAL. W-ATW
MOTION DET. OFF
IRIS LEVEL
SHUTTER OFF