Filter
Top Products
Troubleshooting
COLOR DOME CAMERA User’s Manual
33
COLOR DOME CAMERA User’s Manual
32
If you have trouble operating your camera, refer to the following table. If the
guidelines do not enable you to solve the problem, contact an authorized
technician.
Problem
Nothing appears on
the screen.
The image on the
screen is dim.
The image on the
screen is dark.
The camera is not
working properly, and
the surface of the
camera is hot.
MOTION DETECTION
function is not active.
Solution
• Check that the power cord and line connection
between the camera and monitor are fixed properly.
• Check that you have properly connected VIDEO
cable to the camera VIDEO output jack.
• Is lens stained with dirt? Clean your lens with soft,
clean cloth.
• Set the monitor to proper condition.
• If the camera is exposed to too strong light, change
the camera position.
• Adjust the lens’ focus properly.
•Adjust the contrast feature of the monitor.
• If you have an intermediate device, set the 75Ω/ Hi-z
properly. (refer to page 13)
• Check that you have properly connected the camera
to an appropriate power source.
• Have you set ‘MOTION DET.’ menu to OFF?
• Have you set ‘MD LEVEL’ to too low?
• Have you set ‘MD AREA’ properly?
Problem
The color of the picture
is not matched.
The image on the screen
flickers.
L/L mode isn’t able to
be selected.
Solution
• Check that you have properly set the ‘WHITE BAL.’
menu. (refer to page 21)
• Is the camera facing to direct sunlight or fluoresent
lighting? Change the camera position.
•Have you connected your camera to DC power
source? Connect it to AC power source.